DIY Manual Fan Switch Mod for Cooler Riding
This diy tutorial is a 40 minute project that will allow you to incorporate a manually controlled toggle or rocker switch to switch on the bikes cooling fan when you want.
In a typical condition, the fan is electronically controlled by the mapping program within the ECM and is switched on when the coolant temperature reaches 225 degrees within the radiator. This high heat condition greatly reduces performance and makes street riding practically unbearable at times if riding in especially high traffic condition or where stop and go is present.
This mod will allow you to cool the bike when you want
while still retaining the same 225 auto kick on it was designed with.
0 comments: